Advanced Preparations:. Unplug your modem, and remove the backup battery if it has one. Power on the modem, and then wait about 2 minutes for it to restart. Check for the LEDs to confirm the hardware connection, then refer to the following step to set up. Note: If the 2. Both the LEDs should turn solid.
Note: Please make sure you are able to access internet with a direct connection from the main computer to your cable modem. If the direct connection doesn't work, please contact your Internet Service Provider. Then click Save button. Wait for a few minutes and check the WAN part on the Status page , if it shows any IP address similar as below , that means the connection between the Router and the Modem is established.
If there is still no wan IP address, p lease restart your cable modem, wait for about 10 seconds, and then restart your router. If it's still not working, refer to What should I do if I cannot access the internet through Wi-Fi router? Is this faq useful? Your feedback helps improve this site. If you want to have Wi-Fi, you will need to buy a router and connect the modem to the router as well. To install a modem, start by connecting one end of a coaxial cable, which is a cable with a needle on each end, to the cable output in your home.
Then, attach the other end of the cable to your modem. Next, plug the power cable that came with your modem into an electrical outlet, and plug the other end of the cable into your modem. Finally, if you have a Wi-Fi router that you want to use, plug one end of an ethernet cable into the back of the modem and the other end into the router.
For tips on how to choose the right modem, keep reading! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Related Articles.
Article Summary. Part 1. Make sure that your modem will work with your Internet subscription. While rare, some modems encounter issues when paired with a specific Internet company e. Double-check your modem's compatibility with your current Internet subscription before buying if possible. If you find that your modem won't work with your current subscription, try to exchange the modem for a different one that will work, or switch your Internet subscription. Find your room's cable output. The cable output resembles a metal cylinder with a small hole in the middle and screw threads all around the sides.
You'll usually find cable outputs in the wall near the floor in living rooms and bedrooms. In some cases, there will already be a cable connected to the cable outlet. Decide on a place to mount the modem.
The modem should be relatively high up e. You'll also need to have a power outlet nearby. Make sure that you have all of the required cables. A modem generally requires a coaxial cable to connect to the cable output, as well as a power cable to connect to an electrical outlet. Both of these cables should come with your modem, but if you bought it used, you may need to find replacement cables. If you plan on attaching the modem to a router, you will also need an Ethernet cable.
Consider buying a longer coaxial cable if the one that you have is too short to allow you to mount properly your modem. Read your modem's instructions. Each modem is unique, and yours may require additional setup outside of this article's capacity.
Reading your modem's manual will help make you aware of any additional steps that you have to take to install the modem. Part 2. Attach one end of the coaxial cable to the cable output.
The coaxial cable has a connection that resembles a needle on each end. This will plug into the cable output. Make sure that you screw the coaxial cable onto the cable outlet to ensure that the connection is solid.
Attach the other end of the cable to the input on your modem. On the back of the modem, you should see an input that resembles the cable output cylinder. Attach the free end of the coaxial cable to this input, making sure to tighten as needed. Then, take the other side of the cable and plug it into the router. Plug the router into the wall outlet and press the power button. Suppose your Wi-Fi router turns on automatically, no need to press anything.
Give your router a few minutes to boot up. Suppose, instead, your router keeps restarting. Read our guide to troubleshoot the issue. Now that your router is up and running, it should be broadcasting a wireless signal. Look on the side of your router to find the default network name and SSID. You can use those details to connect your computers, TVs, and mobile devices.
Go to the wireless settings of your Wi-Fi devices to sign into the wide-area network. You should connect your router to the internet. Still, we recommend you log into your router and change the network name and network password.
If you leave your router with default settings, it will leave you vulnerable to unauthorized network activity. In addition, logging into your router will give you access to advanced settings like parental controls.
0コメント